# Levers – Simple Machines for Kids

During our Simple Machines unit, we learned about levers. In this post, I start out talking theory. If you prefer, you can jump to the hands-on science activities for kids age 3 – 6.

## Key Concept of Levers

You place a long bar onto a fulcrum (pivot point). You apply force in one direction, and the pivot point re-directs the force in another direction. To lift the load on one end, you may need the same weight, or more weight or less weight on the other end… all depending on where the fulcrum is.

If you’re working with small kids, stick to that basic point, and skip all the details I’m about to give on classes of levers!

### First Class:

There are three classes of lever. A first-class lever has the fulcrum in between the effort and the load (e.g. between you and the weight you’re trying to lift). You push down on one end, and the other raises up.

If the fulcrum is in the middle (like on a seesaw or a balance scale), then to lift ten pounds of weight, you need to apply ten pounds of force. There’s no mechanical advantage (i.e. the lever doesn’t let you lift anything heavier than you could normally lift).

If you place the fulcrum very close to the load, and have a long bar to press down on, this gives you a mechanical advantage – it makes it easier to lift the load. You might do this if you had a very heavy load to lift, such as using a long lever to pry up a large rock.

### Second class:

The load is in between the fulcrum and the effort. The best example is a wheelbarrow. You lift up on one end, and the fulcrum rests on the ground. Another example is a bottle opener where the fulcrum tucks under the edge of the lid, and one end of the bar rests on the lid.

### Third class:

The effort happens between the load and the fulcrum. “A hammer acts as a third-class lever when it is used to drive in a nail: the fulcrum is the wrist, the effort is applied through the hand, and the load is the resistance of the wood.  Another example of a third-class lever is the human forearm: the fulcrum is the elbow, the effort is applied by the biceps muscle, and the load is in the hand.” (Source)

### A Demonstration:

A see-saw is your ideal demonstration. You can put similar size kids on each end, and they see that it balances out. Then you can put an adult on one end, and see how many kids you need to lift the adult. And then you can try having the adult sit near the middle of the beam on their side, and one kid sit all the way at the end on their side and search for the balance point.

If you don’t have a see-saw, can you create one? It may be hard to easily build something strong enough (and safe enough) to lift an adult and kids, but you could lift a basket of books using something as simple as giant tinker toys or a broom handle balanced over something. Or you can use the seesaw from a Simple Machines Set or rig up any other small 1st class lever model.

## Activities

I’ve listed several activities below. I’ve divided them by which class of lever they are. But again, you can ignore the whole idea of different classes of lever and just treat them all as “levers” if that’s better for the age group you’re working with.

### First-class lever activities:

See-saw: If you have one on your playground, use it and talk about it!

Balancing Act: We inherited part of the materials from the Delta Science Modules Simple Machines kit. There are wood fulcrums (blocks that are rounded on the top and have a rough textured material added so the bar doesn’t just slip and slide), bars, plastic cups and bolts for weights. Kids can practice centering the bar and adding weights to each side.

Using a Balance scale to weigh objects: If you have a balance scale, this is a great time to get it out and let the kids experiment. Last year, we put out one with dry beans. This year, it was in the water table. You could also use blocks, counting bears, Unifix cubes or other objects. This is a great math skills practice, as they see that equal numbers of items or equal volume of water balance out – they’re “the same.”

If you don’t have a scale, you could also build one with a variety of materials, including Tinker Toys or K’NEX.

Or you could build a balance with a coat hanger: http://inspirationlaboratories.com/balancing-with-mms/

Or, with Dixie cups, string, and a popsicle stick…

Building a balance scale:

Materials: jumbo craft sticks with three holes drilled in them. Dixie cups, string or yarn, a pencil or dowel.

1. Take two cups. Punch two holes in each one.
2. Tie a string to one hole on a cup, then thread it through the hole on one end of a stick.
3. Tie the end of the string to the other hole in that cup.
4. Now, take the second cup. Tie a string on, thread it through the hole on the other end of the stick, tie it to the other hole on the second cup.
5. Hold the stick on its side, with the cups hanging down. Put a pencil through the middle hole to be your fulcrum.
6. Put weights in the cups to balance.

Claw hammer: When you use a claw hammer to pull out nails, you’re using it as a first class lever. If you had the kids pound golf tees into something for the wedges lesson, they can use the claw hammer to pull them back out!

Crow bar: Use a crow bar to pry up a heavy load. Or use a stick balanced over a small rock to lift a big rock. Or use a stick balanced over a brick to tip a cinder block over. Or take a pencil, and a ruler and a book: use the pencil as your fulcrum. Put one end of the ruler under the book, and then press down on the other end of the ruler.

Building Activity: We put out this Duplo seesaw kit.

Catapults: Put a pencil on the table (your fulcrum). Balance a popsicle stick over it (your bar). Put a pompon on the lowered end (your load). Strike the other end. The pompon flies into the air. Your kid may repeat for hours. There are lots more catapult ideas in this post.

### Second-class levers:

Wheelbarrows: If you have access to a wheelbarrow, they are GREAT toys for outdoor time. Let the kids load them up and move them around.

Bottle opener: Let your child open a bottle of soda with a bottle cap.

### Third-class levers:

Human arm: We had paper arms kids could decorate, then cut, then fasten together with a brad to create an elbow joint. Then they used yarn to represent the muscle. You can find a similar activity at education.com.

Shovel, rake, or broom: When you use one of these tools, you have one hand at one end, serving as the fulcrum. The other hand is part way down the handle, providing the effort. (You could also use a stick to hit a piñata to demonstrate the force.)

Baseball bat: In addition to helping you lift loads, levers can also be used to speed something up by giving it a push. During outside time, use a baseball bat, or tennis racket, or other tool to demonstrate. Your hands are the fulcrum.

### Double levers:

Scissors: Scissors are a double first class lever. Let kids have some scissor practice. (Like cutting out the arms for the activity above.)

Tongs, tweezers, pliers: You could fill a sensory bin with pom poms and tongs. You could get a dried corn cob, and let kids use tweezers to pick out the kernels. Kids could use pliers to pull nails out of something (like pull the golf tees out of the pumpkin from the wedges activity!)

We filled the sensory bin with things to cut up with scissors, like straws, string, and paper. Then we added lots of types of tongs and encouraged kids to cut things up, then use the tongs to put them into a container. Great small motor / tool use practice.

Nutcracker: A nutcracker is a double second-class lever. If you’re not a nut-free facility, cracking walnuts open can occupy kids for hours!

Hammer: When a hammer is used to hammer in nails, it’s a third class lever.

Creation Station: In our classroom, we have a creation zone filled with recyclables (toilet paper rolls, margarine container lids, and so on), and small dibs and dabs (buttons, interesting pasta shapes, shells, plastic gems, and so on). There’s always an open table with some glue and kids are allowed to create anything they want. The oldest child in our Inventors Lab creates something fabulous each week, tied into the theme. On levers week, she built this seesaw.

Building toys: We also have one room called “The Construction Zone” where we put out various building blocks or other supplies. This week we had giant tinker toys. In the picture at the top of this post, you can see what a dad and child created… it was a see-saw like balance scale, but notice that on the end near the child there are free-floating discs. Those are weights that can be slid back and forth to adjust the power of the lift.

Snack: Use scissors to cut something – like pita bread. Use forks or chopsticks to eat with.

Book: In circle time, we read How Do You Lift a Lion? (Wells of Knowledge Science Series) by Wells, our favorite Simple Machines book. More book recommendations here.

Video: This short video offers a really nice illustrated overview of Levers: https://ed.ted.com/lessons/the-mighty-mathematics-of-the-lever-andy-peterson-and-zack-patterson

Note: All the activities described in my posts are from Family Inventor’s Lab, a parent-child cooperative class in Bellevue, WA. We are a play-based, STEM focused class for preschool through early elementary (kids age 3 – 7). We do a wide variety of fun, hands-on activities to learn about Science, Tools, Engineering, Nature, and Art. We also sing songs and read stories. Most of our activities are cheap, easy, and use everyday materials that most families would have in their homes (or their recycle bins!), so that our activities are appropriate for classroom teachers, parents who homeschool, or after school programs.

1. […] demonstrations / books for each individual machine, click here: Inclined Planes, Pulleys, Wedges, Levers, Screws, Wheels & […]

Like

2. […] blocks and plastic spoons for launch equipment. (In past classes, we had explored Inclined Planes, Levers, and Catapults.) Kids were just shown the target and given a couple suggestions for what to try, […]

Like

3. […] and demonstrations for each individual machine, click here: Inclined Planes, Pulleys, Wedges, Levers, Screws, Wheels & Axles. Here’s an Overview of Simple […]

Like

4. […] Machines Unit: Overview of Simple Machines, Inclined Plane, Lever, Wedge, Screw, Wheel and […]

Like

5. […] Build an elbow joint. You can also make a paper or cardboard arm to show the lever action of the elbow joint, as seen in our Levers class. […]

Like

6. […] access to many options at my teaching sites and in my home stash. We use Tinker Toys when we study levers, we use gears on wheel week,  a KEVA Wrecking Ball and Keva blocks on towers […]

Like

7. […] are our other lessons for Simple Machines: Overview of Simple Machines, Inclined Plane, Lever, Wedge, Screw, Wheel and […]

Like

8. […] 8 year old, or younger kids can do a simpler model of the human arm, like we’ve done in our Levers class. Or you can make a really simple (but somewhat abstract model) with cardstock and rubber […]

Like

9. […] Building a balance scale: We built balance scales. This photo shows an initial test… our final product involved: cutting three holes in a popsicle stick, punching two holes each in two Dixie cups. Tie one cup to one end of the stick, and the other to the other end. Then stick a pencil or dowel through the center hole. (For more ideas on building balance scales, see my post on levers.) […]

Like

10. […] & Lever. Make your own fruit salad. The littlest kids can slice bananas or watermelon with table knives or […]

Like

11. […] Play-dough, with wedges (plastic knives, chisels) and levers (scissors.) Screwdrivers, hammers, nails, screws, hand drill and a board. (For smaller children, […]

Like

12. […] use a balance scale when we study Levers in our Simple Machines […]

Like

13. […] check out the hands-on activities I suggest in my posts on Inclined Planes, Pulleys, Wedges, Levers, Screws, Wheels & Axles.] I would highly recommend this […]

Like

14. […] your child how to build a basic catapult (with a pencil and a craft stick, or a spoon with something as an improvised fulcrum). Launch […]

Like

15. […] The only reason we don’t is because we’ll be building them a few weeks later in our Levers […]

Like

16. […] example of simple machines – that bottom edge you slip under the snow is a wedge, and you use lever action to lift it up. Make colored water (with liquid watercolors or food coloring) and put it in […]

Like

17. […] case your kids ask what a fulcrum and lever are, check out all these awesome experiments here at Inventors of […]

Like

18. […] where the lever pivots is called the fulcrum and the load is the object being lifted. There are three classes of levers depending on where the fulcrum and loads are […]

Like

19. […] also do some fun stuff with pulleys. (And of course lots of articulated limbs would function as levers.) Or you could put a spinning anemometer on the top of the robot’s […]

Like

20. […] Play-dough, with wedges (plastic knives, chisels) and levers (scissors.) Screwdrivers, hammers, nails, screws, hand drill and a board. (For smaller children, […]

Like

21. […] You could also offer craft stick catapults as an option. The only reason we don’t is because we’ll be building them a few weeks later in our Levers class. […]

Like

22. […] access to many options at my teaching sites and in my home stash. We use Tinker Toys when we study levers, we use gears on wheel week,  K’nex for Simple Machines, a KEVA Wrecking Ball and Keva […]

Like

23. […] are our other lessons for Simple Machines: Overview of Simple Machines, Inclined Plane, Lever, Wedge, Screw, Wheel and […]

Like

24. […] most common lever we see is a first-class lever, seesaw style. Something falls onto the end of the lever that’s up in the air, pushing it […]

Like